Activity

For the past six decades, human health risk assessment of chemicals has relied on in vivo data from human epidemiological and experimental animal toxicological studies to inform the derivation of non-cancer toxicity values. The ongoing evolution of this risk assessment paradigm in an environmental landscape of data-poor chemicals has highlighted the need to develop and implement non-testing methods, so-called New Approach Methodologies (NAMs). NAMs include a growing number of in silico and in vitro data streams designed to inform hazard properties of chemicals, including kinetics and dynamics at different levels of biological organization, environmental fate and transport, and exposure. NAMs provide a fit-for-purpose science-basis for human hazard and risk characterization of chemicals ranging from data-gap filling applications to broad evidence-based decision-making. Systematic assembly and delivery of empirical and predicted data for chemicals are paramount to advancing chemical evaluation, and software toooping cancer and non-cancer hazard evidence bases; and 4) access to mechanistic information that can aid or augment the analysis of traditional toxicology evidence bases, or potentially, serve as the primary basis for informing hazard identification and dose-response when traditional bioassay data are lacking. selleck kinase inhibitor Finally, in silico predictive tools developed to conduct structure-activity or read-across analyses are also available within the Dashboard. This practical tutorial is intended to address key questions from the human health risk assessment community dealing with chemicals in both food and in the environment. Perspectives for future development or refinement of the Dashboard highlight foreseen activities to further support the research and risk assessment community in cancer and non-cancer chemical evaluations.

Current developments to assess qualitative and quantitative platelet traits in flowed whole-blood are based on microfluidic devices that mostly operate at room temperature. However, operation at physiological temperature (37°C) may increase the assay’s sensitivity, and facilitates the comparison to other platelet function tests of the diagnostic laboratory.

We adapted the conventional microspot-based microfluidic device with a simple thermo-coupled pre-heating module. Automated analysis of microscopic images assisted in obtaining five time-dependent parameters of thrombus formation over collagen microspots (shear rate 1000s

). These modifications allowed rapid testing of control and patient blood samples at physiological temperature.

The higher temperature enhanced platelet adhesion and aggregation as well as late thrombus characteristics such as size and contraction, when compared to room temperature. Moreover, assessment at 37°C indicated a time-dependent impairment of the thrombus parameters in bloorall, this study underlined the advantage of multiparameter assessment of microfluidic thrombus formation in detecting an acquired platelet dysfunction, when operating at physiological temperature. This work may bring microfluidics tests closer to the diagnostic laboratory.Capacitive deionization (CDI) is considered as a promising desalination technology due to its low energy consumption and no two-second pollution. But the development of traditional CDI is limited by its two drawbacks, which are low deionization capacity and unavoidable parasitic reactions. Hybrid capacitive deionization (HCDI), which is composed of a faradic electrode and an electrical-double-layer electrode, effectively solves the above problem. Herein, we report a typical NASICON material Na3(VO)2(PO4)2F and modify it with rGO, then apply it in HCDI firstly and receive a superior desalination performance. Five samples are prepared by adding different contents GO solution and we choose the best one (NVOPF-4) with the lowest resistance for the desalination tests according to electrochemical performance. The result of desalination shows a high desalination capacity of 175.94 mg·g-1, low energy consumption of 0.35 kWh·kg-NaCl-1, and the energy recovery is 20% at a current density of 25 mg·g-1. NVOPF@rGO displays a promising ability for desalination in capacitive deionization, further confirming NASICON be a suitable material type for HCDI electrode materials.The burst of energy produced from the sustainable energy sources need to be harnessed by energy storage systems. Development of novel and advanced energy storage devices such as supercapacitors discover an enormous future ahead. Recently, hybrid supercapacitors (electric double layer capacitor (EDLC) and pseudocapacitors) trend to be used as energy storage interfaces for their improved efficacy in energy density without altering the power density. In the ongoing workplan, transition metal selenides MnSe2 and its hybrid with multiwalled carbon nanotubes (MWCNTs) are synthesized by a simplistic hydrothermal protocol. Certainly, cubic phases of MnSe2-MWCNT(MS/CNT) manifested superior electrochemical performance in both symmetric and asymmetric full cell configurations in contrast to prestine MnSe2(MS). The asymmetric MS/CNT cell achieved an excellent charge storage capability with an high energy density of 39.45 Wh kg-1 at a power density of 2.25 kW kg-1 maintaining an energy density of 14.5 Wh kg-1 at a high power density of 4.5 kWh kg-1 and also revealed long term stability over 5000 consecutive charge/discharge cycles (capacitance retention of 95.2%). Furthermore, the preferable growth along (200) direction in the presence of MWCNTs favoured in enriching the supercapacitive property of MS. The quantum capacitance of MnSe2surfaces and MS/CNT heterostructure has been estimated using density functional theory simulation to confirm the experimental outcomes. Theoretical investigation simultaneously exposed the contribution of (200) plane of MnSe2 and MWCNTs cultured in enhanced DOS (density of states) near the Fermi level that remarkably promoted the energy storage efficiency of MS/CNT.Separation meshes with special wettability for oil/water separation have drawn much research attention and the preparation of superhydrophobic or underwater superoleophobic materials for oil/water separation has been extensively studied. However, the preparation procedures of inorganic coatings in previous studies were complex and the widely used organic compounds for surface modification were costly and unstable. To address these challenges, the layer-by-layer self-assembly process of inorganic sodium silicate and aluminum oxide powders (SSA) on the copper (Cu) mesh was explored in this paper. Hierarchical and rough structures after electrodepostion were observed by scanning electron microscope (SEM). On the SSA modified Cu mesh, contact angles (CA) of underwater trichloromethane and water in the air were 153° and 1°, respectively. Besides, the modified mesh exhibited high thermal stability, good oil/water separation properties with water flux of 19832 Lm-2h-1 and separation efficiency > 95%, and high recycling performance.